Results for “to_char”
Small, practical examples. Search by task or narrow things down below.
Average a fixed set of readings
Accumulate sample values without overflowing a 16-bit total.
array✓ Tested
Blink the built-in LED three times
Alternate the built-in LED with a short blocking delay.
blink✓ Tested
Blink without blocking the loop
Use elapsed millis time instead of delay for a repeating action.
millis✓ Tested
Branch on a threshold
Arduino / C: Branch on a threshold on an Uno with the Serial Monitor set to 9600 baud.
Arduino / C✓ Tested
Calculate a CRC-8 over a byte sequence
Arduino / C: This implementation uses polynomial 0x07, initial zero, and no reflection.
Arduino / C✓ Tested
Calculate a fixed array’s element count
Arduino / C: Calculate a fixed array’s element count on an Uno with the Serial Monitor set to 9600 baud.
Arduino / C✓ Tested
Calculate a simple packet XOR checksum
Arduino / C: XOR all payload bytes to produce a basic error-detection byte.
Arduino / C✓ Tested
Calculate with integer values
Arduino / C: Calculate with integer values on an Uno with the Serial Monitor set to 9600 baud.
Arduino / C✓ Tested
Change an LED delay with a variable
Arduino / C: Assign a new value to a variable to change the next LED pulse duration.
Arduino / C✓ Tested
Check both ends of a range
Arduino / C: Check both ends of a range on an Uno with the Serial Monitor set to 9600 baud.
Arduino / C✓ Tested
Check EEPROM capacity before a write
Arduino / C: length reports the available address count for this board.
Arduino / C✓ Tested
Check whether input is a nonnegative integer
Reject empty input and nonnumeric characters before arithmetic.
validation✓ Tested